Fix Your Memory Module
 
Home
News
Products
Shop
Memory
Corporate
Contact
 

News
Industry News
Publications
CST News
Help/Support
Member Area
Tester Brochure
Demo Library
Software
Tester FAQs

biology medicine news product technology definition

Friday, July 30, 2010
CST News Release
Email ArticlePrinter Format PreviousNext

JEDEC Clock Reference Board For PC2700 (DDR333) DIMM


Thursday, August 23, 2001

CST Inc,DDRtester.com today announced initiative for the new “PC2700/DDR333-DIMM Clock Reference Board”. This new clock reference board will be designed in co-operation of Integrated Circuit Systems and IBM Micro Electronics . CST, Inc. will handle manufacturing and distribution to the industry.



This “Clock Reference Board”, endorsed by JEDEC, is designed to serve as a test vehicle especially for module designers and module manufacturers (purpose is to “fine tune” memory module assembly during validation), the reference board is also targeted as a qualification vehicle for PC system producers.

The Clock reference board consists of a clock generator which generate several buffered clock output signals. The clock signals are routed to the DDR-DIMM module test socket and to the “Reference Net Circuit”.

An Oscilloscope is used for the waveform measurement at the DDR-SDRAM. These measured waveforms are then compared against measurement taken from the “Reference Net circuit” for time delays and skew.

CST Inc will be building all the Clock Reference Boards in one batch to ensure consistency. A “Golden” Board will be maintained to support future builds.

CST had previously taken up the task of manufacturing and distributing the PC100/PC133 DIMM clock reference board and the PC2100 DDR266 DIMM clock reference board..

Founded in 1983, CST designs, manufactures, markets and support computer memory test software and hardware. CST pioneered the first low cost SIMM tester for computers in 1985. Since then, CST testers have become the standard for computer manufacturing industry, holding more than 70% of the market in memory module testers for computer manufacturers and third party memory module manufacturers. With its product lines of memory module tester and handler, CST is equipped to handle all aspects of memory module testing. CST has a comprehensive line of testers ranging from the low-volume service tester to the high-end, high-volume tester. In addition, CST also provides customization for proprietary module test fixtures.

For further information, visit us at www.DDRtester.com or call our Sales at (972) 241-2662.


By: CST Marketing
Copyright © 2001 CST, Inc. All Rights Reserved

Email ArticlePrinter Format PreviousNext
Latest CST News
CST to unveil the SP3000 DDR3 BGA Chip tester at Computex Show5/17/2010
CST to support LRDIMM or LR-DIMM Testing on the Eureka2 DDR3 1333Mhz Memory Tester10/5/2009
LRDIMM ,RDIMM Memory Module Burn-In Heater-Box System9/18/2009
CST to deliver the DocMemory Pro PCI Memory Diagnostic Test Card7/30/2009
CST to launch the Most Affordable RoboFlex-MiNi Memory Module Handler System7/24/2009
CST to demonstrate DDR3 DIMM Open/Short Tester at the Computex Show5/29/2009
RoboFlex3 Automatic Pick & Place Handler to Debut at Computex Show5/7/2009
CST to launch Eureka2 1333Mhz DDR3 Memory Tester at Computex Show4/20/2009
CST to unveil Rapid Burn-In Test System at Computex Show4/15/2009
CST to unveil DDR3 Memory Application Tester at Computex Show4/13/2009

CST Inc. Memory Tester DDR Tester
Copyright © 1994 - 2010 CST, Inc. All Rights Reserved